Advanced
Insert title here
If you want submit your manuscript to this journal, click the journal title.
Journal Info
Aims&Scope
Editorial
For Author
Current
Archive
 Archive
Volume 24(6); December 2015
1.
Evaluation of Friction Characteristics for High-Strength-Steel Sheets Depending on Conditions

Kim, J. E.;Heo, J. Y.;Yoon, I. C.;Song, J. S.;Youn, K. T.;Park, C. D.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 381-386
2.
Static FE Analysis of Air Springs for Passenger Cars Considering the Mounting Steps

Lee, H. W.;Hahn, H. T.;Park, J. Y.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 387-394
3.
Prediction of the Plastic Strain Ratio Evolution of a Dual-phase Steel

Ha, J.;Lee, J.W.;Lee, M. G.;Barlat, F.;Kim, J. H.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 395-399
4.
Design of Strip Bridge for Unsymmetrical Progressive Stamping for an Automotive Seat Side Cushion Pane

Hong, S.;Joung, C. S.;Choi, B. S.;Lee, D. Y.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 400-404
5.
Friction Behavior of DLC Coating Slid Against AZ31 Magnesium Alloy at Various Temperatures

Gwon, H.;Kim, M. G.;Hur, H. L.;Kim, Y.-S.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 405-410
6.
Hot Forging of an Engine Piston using Control Cooling

Lee, S. I.;Choi, D. H.;Lee, J. H.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 411-417
7.
Development of Thermoplastic-Thermoset Multi Component Injection Mold for a Waterproof Connector

Jung, T. S.;Choi, K. S.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 418-425
8.
Effects of Initial Slug Design on the Earring of a Rectangular Battery Case During Impact Extrusion

Lim, J. H.;Choi, S.;Chung, W. J.;Shin, J. H.;Lee, J.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 425-430
9.
Path Control of MR Fluid Jet Polishing System for the Polishing of an Aspherical Lens Mold Core

Kim, K. B.;Cho, M. W.;Ha, S. J.;Cho, Y. K.;Song, K. H.;Yang, J. K.;Cai, Y.;Lee, J. W.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 431-436
10.
Aspherical Lens Design and Injection Mold Analysis Using Extracted Shape Information

Song, K. H.;Kim, B. C.;Yoon, H. S.;Yang, J. K.;Kim, K. B.;Xiao, H.;Cho, M. W.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 437-442
11.
Application Trend of Plastics: Manufacturing Technology of Plastics for Lightweight Automobile

Lyu, M.-Y.;Choi, T. G.;Cho, H. S.;
Transactions of Materials Processing, vol. 24, iss. 6, 2015, pp. 443-450