Advanced
Optical Design of a Reflecting Telescope for CubeSat
Optical Design of a Reflecting Telescope for CubeSat
Journal of the Optical Society of Korea. 2013. Dec, 17(6): 533-537
Copyright © 2013, Journal of the Optical Society of Korea
  • Received : August 08, 2013
  • Accepted : October 10, 2013
  • Published : December 25, 2013
Download
PDF
e-PUB
PubReader
PPT
Export by style
Share
Article
Author
Metrics
Cited by
TagCloud
About the Authors
Ho Jin
School of Space Research, Kyung Hee University, YongIn 446-701, Korea
Juhee Lim
Satellite Technology Research Center, KAIST, Daejeon 305-701, Korea
Youngju Kim
Yunam Optics, Inc., Icheon 467-811, Korea
smallisle@yunamoptics.com
Sanghyuk Kim
School of Space Research, Kyung Hee University, YongIn 446-701, Korea
Abstract
Space telescope optics is one of the major parts of any space mission used to observe astronomical targets or the Earth. This kind of space mission typically involves bulky and complex opto-mechanics with a long optical tube, but attempts have been made to observe a target with a small satellite. In this paper, we describe the optical design of a reflecting telescope for use in a CubeSat mission. For this design we adopt the off-axis segmented method for astronomical observation techniques based on a Ritchey-Chrétien type telescope. The primary mirror shape is a rectangle with dimensions of 8 cm × 8 cm, and the secondary mirror has dimensions of 2.4 cm × 4.1 cm. The focal ratio is 3 which can yield a 0.383 degree diagonal angle in a 1280 × 800 CMOS color image sensor with a pixel size of 3 μm × 3 μm. This optical design can capture a ~ 4 km × ~ 2.3 km area of the earth’s surface at 700 km altitude operation.
Keywords
I. INTRODUCTION
A telescope for space exploration requires numerous types of technology. In particular, the imaging system is one of the most essential components for scientific research. Generally, astronomical space telescopes and satellite cameras use a reflecting optical system with conic mirrors because the conic surface can be very precise, and the radiation tolerance is much higher than that of refracting lens material [1 , 2] . There are many types of space optics with one or two mirrors used for low-resolution imaging or spectroscopic observation [3 , 4] . Recent imaging sensor technology also allows us to design a wider field of view and achieve higher resolution in space imaging with various satellite platforms. In this paper, we present the optical design of a small reflecting telescope for a 3U CubeSat platform.
CubeSat is a class of nano-satellites initially developed at Stanford University and California Polytechnic State University at San Louis Obispo to facilitate low-cost access to space [5] . The CubeSat platform is a standardized configuration, consisting of one to three 10 cm × 10 cm × 10 cm units (1, 2, or 3 “U”s) arranged in a row, where 1U has a mass of 1.33 kg [6 , 7] . It is launched as a piggyback secondary payload on a large launch vehicle using the Poly-Picosatellite Orbital Deployer (P-POD). There are many kinds of 3U CubeSat missions for scientific research and technical experiments [8 , 9] . Imaging satellites based on CubeSat have mostly been implemented for Earth-observing missions.
Most imaging CubeSats have refraction lens mount optics because it is difficult to fit a reflecting telescope into a CubeSat. Lens mount optics has disadvantages such as the darkening effect caused by space radiation and, misalignment and fragility caused by vibration and thermal effects.
In this paper, we design the optics of a reflecting telescope for a CubeSat unlike previous missions. A major objective is to acquire high-quality images of the Earth’s surface with our new, small reflecting telescope.
II. BASIC REQUIREMENTS FOR THE CUBESAT TELESCOPE
- 2.1. Concept
This research involves the design of a conventional imaging camera system with a small reflecting telescope for a CubeSat mission. We estimate a ~700 km altitude in sun synchronous orbit with a standard CubeSat platform. Figure 1 shows the conceptual operation of the push-broom imaging mode to scan or shoot the Earth’s surface as the CubeSat moves along its orbit. In this section, we describe the fundamental requirements for designing the reflecting telescope for a 3U CubeSat mission (10 cm × 10 cm × 34 cm).
PPT Slide
Lager Image
Concept of CubeSat mission operation to collect images of Earth.
- 2.2. Mechanical Design Requirements
The main constraint of the optical design is the space allowance in CubeSat. There should be no interference in the optical path within the limited CubeSat dimensions. The CubeSat should have avionic electronics and basic structures. Therefore, the telescope space is limited by these constraints. In this design, the minimum space for avionics electronics is 10 cm × 10 cm × 10 cm, and other structural parts require 10 cm × 10 cm × 5 cm. Therefore, the maximum allowed space for the telescope is 10 cm × 10 cm × 19 cm. However, the telescope optics should be installed within a space of 8 cm × 8 cm × 19 cm in order to allow for installation of a support structure for the telescope optics and satellite structure. For this reason, we configured the optics within a space of 8 cm x 8 cm x 19 cm, as shown in Fig. 2 .
PPT Slide
Lager Image
Optical configuration of the CubeSat structure (8 cm × 8 cm × 19 cm).
- 2.3. Optical Design Concept
The main purpose of this telescope optics system is a fine resolution image of Earth’s surface with the CubeSat application. In the case of the CubeSat mission, we can easily find an imaging instrument with a refraction lens mount within this platform because reflecting telescope optics is difficult to fit into a tiny space [7] . In this paper, we design a reflecting telescope optics system unlike the refraction lens design.
The telescope design parameters take into account several volume limitations. Two-mirror optics is a primary consideration; hence, a short focal length is also prioritized. In this case, the dimensions of the primary mirror must be within 8 cm × 8 cm, to fit into the CubeSat envelope. The field of view (FOV) is small in two-mirror optical telescopes; for example, the FOV for the Ritchey-Chretien optical system, which has the largest FOV, is only a few minutes [10] . Therefore, we aim to increase the diameter to achieve a larger FOV compared to that in the Ritchey-Chretien system. Thus, the primary mirror shape becomes a square, which cuts off the edges from a round mirror, as shown in Fig. 3 . The idea is based on the off-axis segmented technique in astronomical telescope applications. We set the focal image plane area to 5 mm diameter because the CMOS image sensing area cannot exceed 4.5 mm. Table 1 shows the optical design parameters for our design. In this table we estimate the ground resolving distance based on the geometrical resolution, without diffraction. In the optical design process the diffraction effect should be of concern, since the detectors can be chosen scientifically so that more energy is collected each instant by every pixel in the FOV. [11] .
PPT Slide
Lager Image
Aperture mask concept. Hatched rectangle is the primary mirror.
PPT Slide
Lager Image
Dimensions of the OV9712 CMOS image sensor.
Design specifications of the telescope
PPT Slide
Lager Image
Design specifications of the telescope
- 2.4. Image Sensor
There are many kinds of sensors used to acquire an image. A CCD device is commonly used for astronomical observations due to its many advantages, such as a large full-well capacity, 100% fill factor, and low readout noise compared to a CMOS image sensor. In this study, however, we choose a CMOS image sensor because it has various pixel sizes and windowing readout mode, and low power consumption, unlike the CCD image sensor. In particular, windowing readout mode is very useful for Earth observation, to overcome the image blur produced by the satellite sweep speed during exposure. Our observation target is the day-time Earth surface, which is bright enough to allow collection of images with CMOS image sensors in the designed telescope. For our optical design, we choose the CMOS image sensor OV9712 produced by Omnivision. The pixel size is 3 μm × 3 μm and the pixel array is 1280 × 800. Table 1 describes the CMOS image sensor used in our design.
III. OPTICAL DESIGN AND ANALYSIS
- 3.1. Telescope Design
The telescope is a conventional two-mirror telescope. We used part of a 226.24 mm diameter mirror as the telescope’s primary mirror. It is a modified off-axis segmented method, as in astronomical observation. The primary and secondary mirrors are rectangular with dimensions of 80 mm × 80 mm and 41 mm × 24 mm, respectively. The rectangular shape maximizes captured light in the rectangular CubeSat body. Figure 5 shows the design layout in which the focal plane is located behind the primary mirror. Table 3 shows the data sheet for the optical design.
PPT Slide
Lager Image
Optical design layout of the CubeSat telescope.
Imaging sensor specifications
PPT Slide
Lager Image
Imaging sensor specifications
Lens data sheet
PPT Slide
Lager Image
Lens data sheet
- 3.2. Optical Performance Analysis
The analysis was carried out with the Code-V optical design program. Figure 6 shows a spot diagram that includes the size and shape of the spot for all visible wavelengths. The spot size indicates that the outermost field (0, 0.094°) and optical axis are 2.3 μ m and 3.3 μ m, respectively.
PPT Slide
Lager Image
Spot diagram. Square box is 6 μm × 6 μm.
This size is slightly larger than 2 pixels. We also investigated astigmatism and distortion; the field curve is presented in Fig. 7 . The distortion is no greater than 2 pixels in scale around the full field, and there is no chromatic aberration due to the reflecting mirror system. We identified the astigmatism from the MTF diagram as shown in Fig. 8 , where the solid line is the MTF value of the radial component of the curve, and the dashed line is the tangential component of the curve. The camera resolution is represented by Eq. (1) in the color image array sensor.
PPT Slide
Lager Image
PPT Slide
Lager Image
Field curves.
PPT Slide
Lager Image
Diffraction MTF.
We observe that the minimum MTF value appears over 0.3 at the 82.26 lp/mm. This is the diffraction MTF. In this case, the tangential and sagittal MTF are a little bit different. On the other hand, this design shows a small amount of fifth-order coma and large-angle astigmatism, and presents a field curvature effect that is relatively much larger than others, as shown in Fig. 9 .
PPT Slide
Lager Image
Ray aberration plot.
IV. CONCLUSION
In this paper we present the optical design of a small reflecting telescope for a CubeSat application. This research considers issues pertaining to the assembly and manufacture of the rectangular mirror, which is designed within a space limitation. We chose a reflecting mirror to obtain high resolution with a small focal length and EPD in a 3U CubeSat.
A recent CMOS image sensor with tiny pixel size and large array also enables us to design the reflecting telescope in this study. It uses a Ritchey-Chrétien optical system, and its MTF is expected to be about 0.3 with a 3.2 mm × 2.8 mm image area. The results show that theoretically it can take images of a ~4 km × ~2.3 km area of the Earth’s surface at 700 km altitude. This telescope shows a reasonable design to obtain a more detailed image with a CubeSat. These results will be used in space exploration with CubeSat missions.
Acknowledgements
This study was partially supported by a grant from the KASI NAP program and also partially supported by the BK21 plus program through the National Research Foundation (NRF) funded by the Ministry of Education of Korea.
References
Lebedeva G.I. , Garbul A.A. 1994 “Prospective aerospace reflective objectives,” J. Opt. Technol. 61 610 - 614
Fruit M. , Gusarov A.I. , Doyle D.B. , Ulbrich G.J. 1999 “Radiation impact on space borne optics, the dose coefficient approach,” Proc. SPIE 3872 60 - 71
Lee J. U. , Yu S. M. 2009 “Analytic design procedure of three-mirror telescope corrected for spherical aberration, coma, astigmatism, and Petzval field curvature,” J. Opt. Soc. Korea 13 184 - 192
Lee J. H. , Jang T. S. , Yang H.-S. , Rhee S.-W. 2008 “Optical design of a compact imaging spectrometer for STSAT3,” J. Opt. Soc. Korea 12 262 - 268
Toorian A. , Diaz K. 2008 “The CubeSat approach to space access,” in Proc. the IEEE Aerospace Conference 1 - 14
Heidt H. , Puig-Suari J. , Moore A.S. , Nakasuka S. 2001 “CubeSat: A new generation of Picosatellite for education and industry low-cost space experimentation,” in Proc. the Utah State University Small Satellite Conference 1 - 19
Smith M.W. , Seager S. , Pong C.M. , Villasenor J.S. , Ricker G.R. , Miller D.W. , Knapp M.E. , Farmer G.T. , Jensen-Clem R. 2010 “ExoplanetSat: Detecting transiting exoplanets using a low-cost CubeSat platform,” Proc. SPIE 7731 773127 -
Yoo J. G. , Jin H. , Seon J. H. , Jeong Y. H. , Glaser D. , Lee D. H. , Lin R. P. 2012 “Thermal analysis of TRIO-CINEMA mission,” Journal of Astronomy and Space Sciences 29 23 - 31
Yoon N. Y. , Yoon S. Y. , Kim Y. H. , Yoon J. W. , Jin H. , Seon J. H. , Chae K. S. , Lee D. H. , Lin R. P. 2012 “Development of CINEMA mission uplink communication system,” Journal of Astronomy and Space Sciences 29 33 - 40
Pan J.H. 1994 The Design, Manufacture and Test of the Aspheric Optical Surface Science Press Beijing, China 10 - 47
Li X. , Xu M. , Ren X. , Pei Y. 2012 “An optical design off-axis four-mirror-anastigmatic telescope for remote sensing,” J. Opt. Soc. Korea 16 243 - 246