Advanced
Airborne Infrared Scanning Imaging System with Rotating Drum for Fire Detection
Airborne Infrared Scanning Imaging System with Rotating Drum for Fire Detection
Journal of the Optical Society of Korea. 2011. Dec, 15(4): 340-344
Copyright ©2011, Optical Society of Korea
  • Received : October 10, 2011
  • Accepted : November 11, 2011
  • Published : December 25, 2011
Download
PDF
e-PUB
PubReader
PPT
Export by style
Share
Article
Author
Metrics
Cited by
TagCloud
About the Authors
Dalin Song
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
Jun Chang
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
bitchang@bit.edu.cn
Jiao Cao
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
Lifei Zhang
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
Yao Wen
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
Aman Wei
School of Optoelectronic, Beijing Institute of Technology, Beijing 100081, China
Jiang Li
Patent Examination Cooperation Center of SIPO, Beijing 100190, China
Abstract
Airborne infrared techniques have been used in wild land fire management for decades. This paper describes a kind of infrared scanning system based on a rotating drum with a tilted porthole underside the plane nose. This design increases the stability of the mechanism system, reduces air resistance and protects inner parts. Aberration characteristics of a tilted ellipsoid porthole are analyzed and an effective solution is invented which makes the system achieve 30° field of regard. The system’s ultimate value of modulation transfer function is near the diffraction limit, which indicates that the performance of the rotating optical system meets the imaging requirements.
Keywords
I. INTRODUCTION
The controlled use of fire is an impetus to human civilization, but the runaway forest fire can cause great damage and the loss of life and property. The airborne infrared (IR) detection technique has been applied in the area of wild land fire detection for nearly half a century. It is widely used to detect, monitor, and orientate fire suppression and mop-up operations. Tradition infrared systems are mounted in two styles --nadir or gimbaled. The sensor is pointed directly below the plane belly and provides a relatively narrow field of view with nadir mounts. These systems are capable of imaging a large incident promptly, and help the fire managers to get a snapshot of the conditions. With gimbaled mounts, widely known as forward-looking IR (FLIR) balls, the IR equipment mounted on a stabilized turret pointing nearly any direction is not masked by the plane body, and is very practical for fire-line mapping and mop-up operations. They scan the object from different angles, thus the FLIR can discover fire which may elude nadir-mounted systems. However few of FLIR balls are mounted on fixed winged aircraft as most civilian planes have a low body and the turret is protruding beneath the plane chassis. Stones rising from airfield runway are likely to crush the FLIR window as the plane taxies. Besides, the projecting turret increases air resistance and reduces cruising speed. [1 - 4]
According to the above analysis it is necessary to investigate an improved airborne IR detection system which is inside the plane body to avoid injury, mounts with a tilted porthole conformal to the prow for decreasing air drag and has an appropriate scanning mechanism able to provide a large field of view.
II. ABERRATION ANALYSIS AND CORRECTION
- 2.1. Tilted Glass Porthole Aberration Analysis
The nose of a firefighting cruising plane model could be simplified as an ellipsoid. A typical value of the ellipsoid length divided by the height can be taken as 2.
Fig. 1 shows the layout of the ellipsoidal plane nose with a perfect lens at four different scanning positions from -30° to -60° in 10° increments. Fig. 2 shows large amplitude selected Zernike aberrations across the wide FOR (Field of regard -the area covered for the detector of the system when pointing to all possible mechanically positions 5 ). As shown in the chart (wavelength = 4 ㎛) the dominant aberrations caused by an ellipsoidal dome are 3rd order
Lager Image
Layout of ellipsoidal nose porthole with a perfectlens.
Lager Image
Selected Zernike aberrations.
astigmatism (Z5). So the fundamental challenge is to find an appropriate scheme to correct this large aberration.
- 2.2. Theory of Primary Aberration for the Ellipsoidal Surface
Aberration characteristics of the ellipsoidal surface are similar to those of a spherical surface except for the distri-bution among surfaces. To calculate the primary aberration distribution of an ordinary aspheric surface, one ellipsoidal surface can be considered as the overlap of one spherical surface and another zero center thickness plate as shown in Fig. 3 , where the z axis is the optic axis, r axis is the meridian plane coordinate axis, O is the origin of coordinates, r 0 is the datum surface radius, c is the center of curvature, Δz is thinness increment of the zero center thickness plate, n and n’ are material refractive indices before and after the surface respectively.
Relative to a spherical surface which has the same axial curvature radius r0, the 3rd order astigmatism aberration coefficients increment of the ellipsoidal surface can be
Lager Image
Overlap of zero center thickness plate and one spherical surface.
described as
Lager Image
where h is the intersection height of the paraxial ray on the aspheric plate, hz is the intersection height of the chief ray on the aspheric plate, and e is eccentricity. [6 - 8]
The additional aberrations induced by the ellipsoid surface (0< e 2 < 1) could be described by the above expression (1). Because the e 2 increment is in direct proportion to -e 2 , an oblate element (e 2 < 0) can provide balance of additive 3rd order astigmatism induced by the ellipsoidal porthole(0< e 2 < 1). The opposite signed additive aberrations can be cancelled out for different conic surfaces. We suppose that one conic plate corrector could correct the additional aberrations induced by an ellipsoid optical window with appropriate aperture position.
- 2.3. Oblate Corrector for Ellipsoid Nose Porthole
The ellipsoid MgF 2 porthole glass is to be compensated in this design. We take advantage of the powerful features of commercially-available optical design software to optimize the oblate correction element. Fig. 4 shows the system layout followed by a perfect F/4 lens at 4200 nm wavelength across the -30° to -60° FOR. Zernike aberrations are analyzed with and without the oblate corrector respecti-vely as shown in Fig. 5 (wavelength = 4 ㎛), which indicates that the corrector has compensated the 3rd order stigmatism to a great extent.
III. SCANNING OPTICAL SYSTEM DESIGN
- 3.1. System Scheme and Specifications
Fig. 6 shows the design of a complete scanning IR optical system with tilted MgF 2 porthole, oblate corrector, rotating drum and imaging lens. The porthole glass and
Lager Image
Ellipsoid MgF2 porthole glass with one oblate corrector.
Lager Image
The 5th Zernike aberrations with and without corrector.
Relevant specifications for the entire IR optical system
Lager Image
Relevant specifications for the entire IR optical system
oblate corrector are similar to those analyzed in section 2.3. Table 1 lists the design specifications. IFOV means the instantaneous field of view.
- 3.2. Simulations and Optimizations Methodology
The complete system layout shown in Figure 6 is the result of a stepwise design process. A reflective rotating drum is adopted for scanning the target fire. The drum center is located on the optical axes of the MgF 2 porthole and the oblate corrector. The subsequent imaging system is a conventional secondary imaging structure. It has 100%
Lager Image
IR scanning system with tilted MgF2 porthole, oblate corrector, oscillating mirror and imaging lens group.
Imaging lens surface parameters
Lager Image
Imaging lens surface parameters
cold shield efficiency and can reduce the radial size of the system.[9] Ultimate optimization of the complete structure for all four different FOR position results in the final design. Table 2 lists detailed imaging lens surface parameters.
- 3.3. Results
The system’s ultimate modulation transfer function (MTF) of the IR scanning optical system is approximately at the diffraction limit as shown in Fig. 7 .
Lager Image
System’s ultimate value of modulation transfer functions.
Some tolerance items of the corrector
Lager Image
Some tolerance items of the corrector
Probable change in MTF for 20 cycles/mm
Lager Image
Probable change in MTF for 20 cycles/mm
Table 3 lists some of tolerance items of the corrector and Table 4 lists the probable change in MTF for 20 cycles/mm at 97.7% cumulative probability.
IV. CONCLUSIONS
We have shown the design of an IR scanning optical system for airborne wild land fire detection equipment with a rotating drum. The reflective drum is an effective and practical way to scan large FOR and also the oblate corrector is appropriate in compensating aberrations arising in a tilted porthole. This optical system provides an easy-fabrication and low-cost scheme for land wildfire alarms.
References
Johnson J. Phoenixand Infrared Imagery Interpretation: Changes to Wild LandFire Incident Support Over the Past Five Years RS2008 Remote Sensing Applications Center
United States Department of Agriculture Forest Service-Engineering, Remote Sensing Applications Center 2003 Infrared Field Users’ Guide and Vendor Listings RSAC-1309-RPT1
Chung Y. , Lee B. , Kim S. (2009) “Optimal shape design of dielectric micro lens using FDTD and topology opti-mization” J. Opt. Soc. Korea 13 286 - 293
Rim C. (2010) “The optical design of miniaturized microscope objective for CARS imaging catheter with fiber bundle” J. Opt. Soc. Korea 14 424 - 430
http://en.allexperts.com/q/Satellite-Communications-2436/f/Fi eld-Regard-Field-View.htm.
Zhang Y. M. 2008 “Primary aberration of aspheric surface” in Applied Optics Publishing House of Electronics Industry Beijing, China
Smith W. J. 2005 “Third-order aberrations- contributions from aspheric surface” in Modern Lens Design McGraw-Hill Companies New York, USA
Song D. L. , Chang J. , Wang Q. F. , He W. B. , Cao J. (2011) “Conformal optical system design with a single fixed conic corrector” J. Chin. Phys. B 20 0742 - 01