This paper presents a design of novel 2-phase 6/5 switched reluctance motor (SRM) for an air-blower application. This type of motor is suitable for the applications that require high speed and only one directional rotation as air-blower. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor can be operated at any rotor position. The proposed 6/5 SRM uses short flux path technique that achieved by means of winding configuration and lamination geometry. The purpose of short flux path is to reduce the core loss and the absorption MMF in the stator. The proposed 2-phase 6/5 SRM is verified by finite element method (FEM) analysis and Matlab-Simulink. In order to verify the design, a prototype of the proposed motor was manufactured for practical system.
In recent, high speed motor drives are much interested in the practical applications to reduce the system size with an increased efficiency. Especially, blowers, compressors, pump and spindle drives are suitable for the high speed motor drives. The demand for the high speed motor system is much increased according to the industrial market. For a practical system, various electric machines are researched to apply for the high speed application such as DC motors, permanent magnet machines and SRMs.
SRM has simple structure and inherent mechanical strength without rotor winding or permanent magnet. These mechanical structures are suitable for harsh environments and high temperature and high speed applications
This paper presents of a 2-phase 6/5 SRM for an air-blower. In this application, the impeller rotates only one direction, and it requires a wide positive torque without torque dead-zone.
The proposed 6/5 SRM has self-starting ability without torque dead-zone. The 6/5 SRM is designed with 6 stator poles and 5 rotor poles. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered.
The desired motor is employed short flux path
. This is an advantage of 6/5 SRM. The advantages of short flux path are to increase the efficiency and torque production while decrease the core loses.
2. Design of the 2-Phase 6/5 SRM
The dimensions of the 6/5 SRM were calculated according to the given output power, rated torque, rated speed and considerations of the dimension limited conditions. The calculations based on the relationship between mechanical energy and electrical energy explained by electromechanical energy conversion principle. In addition, the flux density, the magnetic saturation and the coil fill factor are also considered. The geometry structure and magnetic circuit will be verified by FEM software and Matlab-Simulink. To satisfy the requirements of air blower application, the 6/5 SRM was designed with dimensions as provided in
The specifications of the proposed 6/5 SRM
The specifications of the proposed 6/5 SRM
- 2.1 Configurations of 6/5 SRM
shows the 2-phase 6/5 SRM structure. The proposed motor has 6 stator poles and 5 rotor poles. The stator is separated into two cores with three poles each, and between these cores have no steel lamination. To keep the rotor poles do not touch into the stator poles, the stator core is fixed by an aluminum plate. The plate has no influences on flux distribution of the proposed motor. Each phase consists of windings on three poles of the E-core, and these windings are connected in serial. With this structure, the magnetic flux flows through the stator core are to be shortest.
The stator is divided into two E-cores with three stator poles for each, in which the middle stator pole arc is greater than other ones. Two smaller stator poles are designed with a half of rotor pole arc. The angle between two stator poles adjacent in E-core is 72° that equal to one rotor pole pitch. The stator coil is wrapped round each stator pole with direction as shown in
, and these coils are connected each other in serial. Two E-cores are shifted an angle 180°, and each E-core is one phase.
2-phase 6/5 SRM structure
A disadvantage of the one-phase and 2-phase motor is self-starting ability, and the 6/5 SRM is not an exception. To overcome the torque dead-zone problem, the 6/5 SRM uses a uniform rotor shape and an asymmetric inductance profile.
shows the rotor shape of the 6/5 SRM. The main purpose of this rotor type is to expand the positive torque by means increase the positive inductance variation. The rotor shape is divided into two regions, and the rotor radius of the first region is smaller than the second one. The effects of this rotor shape like as the stepper rotor shape. With geometric structure, the inductance in the motor depends on the air-gap length and overlap area between rotor and stator poles.
In the first region, the increase of inductance is the result of the increase of overlap area between rotor and stator. The rotor radius is kept constant in this region. And when rotor rotated by 22°, which equal to stator pole arc, the rotor and stator are full overlap, and the overlap area is constant. In the second region, the increase of inductance is due to the reduction of average air-gap length. The overlap area consists of two areas that are the areas with smaller and lager air gap. The inductance is increased by increasing the smaller air-gap area until the first region is out of overlap region. So the inductance is increased during rotor rotation, 44°.
shows the magnetic flux path in the proposed 6/5 SRM at the aligned position. The magnetic flux path is divided into two closed loops, in which middle stator pole is shared. Because the E-cores were separated, so magnetic flux in the E-core cannot flow through each other. The flux path in the 6/5 SRM is shorter than conventional ones. A shorter flux path results a lower reluctance in stator core that means it needs lower MMF to produce the same torque. So, a motor with short flux path can reduce current amount or winding-turns with the same output torque.
Magnetic flux path (a) Phase A; (b) Phase B
- 2.2 FEM analysis
The SRM has nonlinear characteristic, the torque production depends on both current and rotor position. An FEA is needed to verify the design as well as for simulation of the proposed motor. In this paper, the FEMM software is used, it is free software. The FEMM is used in combination with Matlab to analyze the motor characteristic. The motor characteristics such as torque production, flux-linkage, and inductance are calculated by using FEEM. The data obtained from FEM analysis will be used for simulation of the 6/5 SRM drive system.
shows the flux distribution in the 6/5 SRM. To get a high torque density, the 6/5 SRM is analyzed at saturation state of magnetic material. Because the stator of the 6/5 SRM with two E-cores are separated, so the magnetic flux flows through only in E-core with respective phase excitation. There is no fringing or mutual flux linkage between two phases. The 6/5 SRM also has no revert magnetic flux, for this reason, the core losses is reduced.
Flux distribution (a) Phase A; (b) Phase B
Torque is one of most important parameters. The designers try to increases torque with efficiency. The higher torque density that means the motor size and the cost can be reduced. In this paper, the desired air-blower requires a wide positive torque without torque dead-zone. When calculated the dimension of the motor, only average torque was considered. But torque is a function of both rotor position and phase current, and it varies vs. rotor position with a given current. Torque is analyzed with phase current from 0 to a current amount where the motor achieved saturation state as shown in
, in which the torque characteristic at rated value is most important. Compared with the others motor which have a uniform rotor shape, the proposed motor has lower torque production.
Torque characteristics depend on the relationship between flux linkages and rotor position as a function of phase current. Torque varies with rotor position and phase current. The torque production can be estimated by (1).
is the electromagnetic torque,
is the excited current, and
) is the inductance dependent on the rotor position and phase current.
By using the 2D FEA, the inductance and torque characteristics are analyzed.
shows the torque profile of the proposed motor.
shows that the overlap torque is about 10 degree. This overlap torque ensures that the motor can be operated without the torque dead-zone and has self-starting ability.
Output torque of 2 phases
shows the inductance profile of the proposed motor. Because of uniform rotor shape, the 6/5 SRM has asymmetric inductance and torque profile with a wider positive region. This characteristic of inductance makes 6/5 SRM is suitable for unidirectional rotation devices as air blower in this study.
Similar as torque, the inductance is also analyzed with various given current until reach the saturation state. The unaligned inductance is about 3.5 [mH] while the aligned inductance is about 9.3 [mH]. The unaligned inductance effects on the rising time of current that is the time from 0 [A] to desired current, it is important in high speed SRM. If the unaligned inductance is high, a high voltage to build up the current to desired value is needed.
3. Experimental Results
In order to verify the proposed design, a prototype was manufactured for practical system.
shows the prototype of the proposed 6/5 SRM. The prototype was manufactured with specifications as shown in
Prototype 6/5 SRM
shows the experimental setup of the 6/5 SRM drive system. The load is supplied by the dynamometer and the output power is measured by high-speed dynamometer 2WB43. The input power is measured by the power analyzer PPA2530.
shows the 2-phase asymmetric converter of the motor control system. Current of the motor is measured by a current sensor (ACS712) and embedded 12-bit ADC of DSP (TMS320F2811). The DC link voltage is measured by a voltage sensor (A-788J) and embedded ADC.
High speed 2-phase converter
The rated speed of the 6/5 SRM is 15,000 [rpm], normal optical encoders cannot work because of mechanical problem. A low resolution rotor position sensor was used to detect the rotor position and determine the rotor speed as shown in
. The rotor position sensor has 10 pulses per revolution with the ultra fast opto-coupler. The signal from position sensor is connected to the QEP module of DSP to determine the turn-on, turn-off angle and the rotor speed.
Rotor position sensor
The proposed motor was designed to replace the universal motor that used in the hand-dryer machine. The universal motor is shown in
. The proposed motor dimension is the same with that of the universal motor.
shows the proposed motor with an air blower.
Proposed motor with air blower
shows the control scheme for the 6/5 SRM. There are two controllers: current and speed controller. Output of speed controller is command current for current controller. Current limiter block is to limit command current below allowable current value. Output of current controller is command voltage for PWM generator.
Control scheme for proposed 6/5 SRM
shows the experimental results of the proposed motor with air-blower at 10,000[rpm] and 15,000[rpm], respectively. Current controller was applied for proposed motor scheme. As shown in
, there is no over-shoot on phase currents.
Experimental results of proposed motor with air-blower
The output and input power are mesured by high speed dynamometer 2WB43 and power analyzer PPA2530, respectively.
shows the experimental results of the proposed 6/5 SRM with dynamometer.
Experimental results of proposed motor with dynamometer
The total efficiency of the motor driver system at rated value, including the power converter and motor is 75.3% as shown in
. The efficiency of the proposed motor is higher than that of the universal motor, which is 68%.
Efficiency and output power characteristic at rated torque
This paper presents a novel 2-phase 6/5 SRM which has short flux path to reduce core losses and increase torque production. In order to produce a continuous output torque, the positive torque region is extended with asymmetric inductance characteristic. The proposed motor is suitable for applications that require unidirectional rotation.
The performance of the proposed 6/5 SRM was verified with a practical drive system and air-blower test. In the experiment, the efficiency of the proposed motor is higher than that of the universal motor.
This work was supported by the Ministry of Education (MOE) through the Human Resource Training Project for Regional Innovation and BK21 plus.
Trung Hieu Pham was born in Chon Thanh, Binh Phuoc, Vietnam. He received his B. Tech in Electrical and Electronics Engineering from Binh Duong University, Binh Duong, Vietnam, in 2009. He is currently a Ph.D. course student in Kyungsung University, Busan, Korea. His current research interests are a design of switched reluctance motor and power electronics.
Dong-Hee Lee was born on Nov. 11, 1970 and received B.S, M.S., and Ph. D degrees in Electrical Engineering from Pusan National University, Busan, Korea, in 1996, 1998 and 2001, respectively. He worked as a Senior Researcher of Servo R&D Team at OTIS-LG, from 2002 to 2005. He has been with Kyungsung University, Busan, Korea, as an Associate professor in the Department of Mechatronics Engineering since 2005. He is a visiting professor in UW-madison in 2012. His major research field is the Power Electronics and motor control system. He is an associate editor of Journal of Power Electronics.
Jin-Woo Ahn was born in Busan, Korea, in 1958. He received his B.S., M.S., and Ph.D. degrees in Electrical Engineering from Pusan National University, Busan, Korea, in 1984, 1986 and 1992, respectively. He has been a Professor in the Department of Mechatronics Engineering, Kyungsung University, Busan, Korea, since 1992. He was a Visiting Professor in the Department of Electrical and Computer Engineering and in WEMPEC at the University of Wisconsin-Madison, Madison, WI, USA, from July 1998 to July 1999. He was also a Visiting Professor in the Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA, USA, from July 2006 to June 2007. Professor Ahn is an Adjunct Professor of Shenyang University of Technology, Shenyang, China. He is the director of the Smart Mechatronics Advanced Research and Technology Institute. He is the author of five books including SRM, the author of more than 200 papers and has more than 30 patents. His current research interests include advanced motor drive systems and electric vehicle drives. He has received many awards including a 2011 Busan Science and Technology Award He also received Ministerial Citations from the Ministry of Knowledge Economy and Ministry of Health and Welfare, Korea for his contributions to electrical engineering and industry in 2011 and 2013, respectively. He has served as a Conference Chairman of the International Conference on Electric Machines and Systems 2013 (ICEMS2013), and of the International Conference on Industrial Technology 2014 (IEEE/ICIT2014). He is the Editor-in-Chief of the Journal of International Conference on Electric Machines and Systems (JICEMS). He is a Fellow Member of the Korean Institute of Electrical Engineers, a Member of the Korean Institute of Power Electronics and a Senior Member of the IEEE.
“Switched Reluctance Motor: Modeling, Simulation, Analysis, Design, and Applications”
“Switched Reluctance Motor and Their Control”
Magna Physics Publishing
“Characteristics of 4/2 Switched Reluctance Motor for a high speed drive by the excitation angle”
International Conference on Electrical Machines and Systems, ICEMS 15-18
Lee D. H.
Khoi H. K. M.
Ahn J. W.
“Design and Analysis of High Speed 4/2 SRMs for an air-blower”
IEEE International Symposium Industrial Electronics
Lee D. H.
Ahn J. W.
“Design and Analysis of a Novel 4/5 Two-Phase Switched Reluctance Motor”
IEEE International Conference of Electrical Machines and System
Lee D. H.
Ahn J. W.
“Characteristic analysis of a Novel 6/5 c-core type three-phase Switched Reluctance Motor”
IEEE International Conference of Electrical Machines and System
“New Designs of a Two- Phase E-Core Machine by Optimizing of Magnetic Structure for a Specific Application: Concept, Design, and Analysis”
IEEE Industry Applications Society
DOI : 10.1109/TIA.2009.2027570