Advanced
LEE SANG GAK TELESCOPE (LSGT): A REMOTELY OPERATED ROBOTIC TELESCOPE FOR EDUCATION AND RESEARCH AT SEOUL NATIONAL UNIVERSITY
LEE SANG GAK TELESCOPE (LSGT): A REMOTELY OPERATED ROBOTIC TELESCOPE FOR EDUCATION AND RESEARCH AT SEOUL NATIONAL UNIVERSITY
Journal of The Korean Astronomical Society. 2015. Aug, 48(4): 207-212
Copyright © 2015, The Korean Astronomical Soiety
  • Received : July 03, 2015
  • Accepted : July 31, 2015
  • Published : August 31, 2015
Download
PDF
e-PUB
PubReader
PPT
Export by style
Share
Article
Author
Metrics
Cited by
TagCloud
About the Authors
Myungshin Im
Korea Institute for Advanced Study, 85 Hoegiro, Dongdaemun-gu, Seoul 130-722, Republic of Korea
Changsu Choi
Astronomy Program, Department of Physics and Astronomy, Seoul National University, Gwanak-gu, Seoul 151-742, Korea
Kihyun Kim
Astronomy Program, Department of Physics and Astronomy, Seoul National University, Gwanak-gu, Seoul 151-742, Korea

Abstract
We introduce the Lee Sang Gak Telescope (LSGT), a remotely operated, robotic 0.43-meter telescope. The telescope was installed at the Siding Spring Observatory, Australia, in 2014 October, to secure regular and exclusive access to the dark sky and excellent atmospheric conditions in the southern hemisphere from the Seoul National University (SNU) campus. Here, we describe the LSGT system and its performance, present example images from early observations, and discuss a future plan to upgrade the system. The use of the telescope includes (i) long-term monitoring observations of nearby galaxies, active galactic nuclei, and supernovae; (ii) rapid follow-up observations of transients such as gamma-ray bursts and gravitational wave sources; and (iii) observations for educational activities at SNU. Based on observations performed so far, we find that the telescope is capable of providing images to a depth of R = 21:5 mag (point source detection) at 5- σ with 15 min total integration time under good observing conditions.
Keywords
1. INTRODUCTION
To obtain high quality data for astronomical research, it is necessary to install telescopes at locations oering dark sky, low humidity, and stable atmospheric conditions. Such places are usually found in remote locations, on mountain-tops that do not allow easy access, forcing astronomers to make long trips to these locations and making it dicult to carry out observations exibly such as a rapid observation of new interesting astronomical sources. However, recent advances in computer networking and remote control technologies have made it possible to operate telescopes remotely from places such as cities where most astronomers reside. Nowadays, professional astronomers often carry out observations from a remote location (e.g., their office). Amateur astronomers are also setting up remotely operated telescopes in locations favorable for astronomical observations.
Seoul National University (SNU) has several optical telescopes on campus that are equipped with optical imagers and a low resolution spectrograph. These telescopes have been used for educational activities of SNU students and occasionally for research projects. However, the use of these telescopes has suered greatly from light-pollution due the fast development of the metropolitan Seoul area in the last several decades. The sky brightness at SNU has been reported as B ≃ 17 − 18 mag arcsec −2 and V ≃ 16 − 17.3 mag arcsec −2 a9 Lee et al. 2009 ), several hundred times brighter than the night sky of astronomical observatories at remote locations (e.g., Leinert & Mattila 1998 ; Patat 2003 ; Pedani 2009 ; Aceituno et al. 2011 ). The bright night sky limits observations at the SNU campus to only bright objects with R ≲ 18.3 mag with a 0.6-meter telescope ( Choi et al. 2014 ; 5- σ detection limit of a point source at 15 min total integration).
In order to access dark skies with excellent astroclimate, we have installed instruments on telescopes at several remote sites. Examples include the Seoul National University 4k×4k Camera (SNUCAM) on the 1.5-meter telescope of the Maidanak observatory, Uzbekistan ( Im . 2010 ), and the Camera for QUasars in EArly uNiverse (CQUEAN) of the 2.1-meter telescope at the McDonald observatory ( Park . 2010 ; Kim . 2010 ; Lim . 2013 ). However, the use of these facilities has been rather limited, mostly due to high demands for the telescopes for other research projects. In order to gain regular, exclusive access of the southern hemisphere dark sky, we recently installed a remotely operated, robotic telescope at the Siding Spring Observatory (SSO) in Australia. We named this telescope as “Lee Sang Gak Telescope” (LSGT) to honor the recently retired SNU professor who donated a signicant portion of the funding that made this telescope possible. LSGT is now regularly used for observational classes and research projects at SNU.
LSGT is anticipated to be extensively used by both astronomers and students. To help the potential telescope users to plan observations with LSGT, we describe in this paper the overall characteristics of LSGT, its performance, and highlights from its usage so far.
2. SYSTEM
LSGT ( Figure 1 ) is a Corrected Dall-Kirkham (CDK) design telescope with a 0.43-meter (17-inch) diameter primary mirror. It is manufactured by the PlaneWave Instruments 1 and matched with a PlaneWave Instrument’s Ascension 200HR mount. The CDK design adopts an ellipsoidal primary mirror, a spherical secondary mirror, and a combination of two lenses to produce a coma-free flat field with no off-axis astigmatism over a 52mm diameter circle. Given the good performance of the mount and a need to rapidly observe targets, we opted not to use an auto-guiding system. The effective focal ratio of the telescope is f/6.8, and the telescope is designed to achieve a good, distortion-free image quality over 1 degree diameter circle. Figure 2 shows the combined throughput of the reflectivity of the mirrors and the transmittance of the lenses. The data are kindly provided by PlaneWave Instruments.
PPT Slide
Lager Image
The Lee Sang Gak Telescope, shown shortly after its installation at the Siding Spring Observatory, Australia in 2014 October.
PPT Slide
Lager Image
The overall throughput of the optical telescope system of LSGT.
The currently available instrument is the ST-10XME camera of the SBIG Astronomical Instruments (a division of Diraction Limited). This camera uses the KAF-3200ME chip, which offers a peak quantum efficiency (QE) of 85% and a pixel size of 6.8 μ m in a 2184 x 1472 layout. On LSGT, the pixel scale translates to
PPT Slide
Lager Image
, and a field of view of
PPT Slide
Lager Image
. Another camera, Starlight Xpress’s SXVR-H36, is also available on demand. The CCD chip, the Truesense’s KAI-16000 interline CCD, has a dimension of 36.3mm × 24.4mm (4904 × 3280 pixels) with a physical pixel size of 7.4 μ m. On LSGT, it gives a pixel scale of
PPT Slide
Lager Image
and a field of view of
PPT Slide
Lager Image
. The QEs of these two cameras, along with a planned future upgrade (Section 6), are plotted in Figure 3 .
PPT Slide
Lager Image
QEs of the CCDs on different cameras that have been in use or planned for LSGT. The current camera uses the KAF-3200ME chip (solid line), while we plan to upgrade it with a new camera that is equipped with a deep-depletion chip (dotted line). The data are taken from the manufacturer’s data sheet.
Table 1 summarizes the characteristics of the cameras on LSGT. The standard UBV RI and luminance, H α , S II, and O III filters are currently available. The telescope is installed in a roll-off-roof dome, together with other telescopes that are managed by iTelescope.Net Pty. Ltd. 2 . The management of the telescope by the private company saves efforts of SNU personnel.
LSGT Camera Specifications
PPT Slide
Lager Image
a Operating camera as of 2015 August 31.b Measurements with CCD temperature at −10℃.c For most of the pixels, < 0.05 e/pix/sec. But, 6 % are warm pixels with 0.05 - 0.5 e/pix/sec and 2% with > 0.5 e/pix/sec.d Manufacturer’s data.
3. OPERATION AND DATA REDUCTION
Observations have been carried out either robotically by writing a “plan” script that lists a number of commands that specify the observation of a target, or by typing in observational commands remotely in real-time. Under the robotic operation, the observations are executed at the time specified in the plan automatically. In both cases, we access the system through a standard web browser system that is set up by iTelescope.Net.
The focusing of the telescope is done by running an auto-focus program over a target field or a field with bright stars near the target. The typical overhead for the auto-focusing is about ~3 minutes, including the telescope slew time. The command scripts allow us to skip focusing through different filters by adopting a pre-defined focus offset, and to specify the frequency of the focusing. Typical observations require focusing approximately every two hours. Bias and dark frames are taken regularly during daytime or cloudy nights with the cover of the telescope and the dome closed. The flats are taken on demand several times per month using a flat-field screen. The flat-field pattern shows little variation day-by-day so the sparse acquisition of the flat field image is adequate. As soon as the data are taken, the system performs the bias/dark subtraction and flat-fielding with a standard set of calibration files. The raw images as well as the calibrated images become available soon after the observation (typically a few minutes after) for download.
4. PERFORMANCE
Since the installation of LSGT at SSO in 2014 October, we have been improving the system performance. Here, we report the current performance of the telescope based on observational data.
- 4.1. SXVR-H36
Early test observations in 2014 October and November were carried out using the SXVR-H36 camera. Figure 4 shows a test image of NGC 1097 taken with this camera. B , V , and R band images were combined to create the composite image with 300 sec exposure per band. Basic calibration of bias and dark subtraction and flat-fielding was done. The overall quality of the image is good, but a vignetting pattern can be seen near the corners of the chip. From the image, we measure a 5- σ limiting magnitude for point sources is V = 20 mag with 300 sec exposure at
PPT Slide
Lager Image
seeing and a dark night. The optical alignment was not optimal during the test observations with the SXVR-H36 camera, but it allowed a uniform image quality over the camera field of view with the ~
PPT Slide
Lager Image
seeing.
PPT Slide
Lager Image
A BV R composite color image of NGC 1097 taken with the SXVR-H36 camera. While the image quality is good over the whole field, vignetting is visible near the corners of the image.
- 4.2. SBIG ST-10XME and Limiting Magnitude
Since 2014 November 14, LSGT observations have been carried out using the ST-10XME camera. We decided to use the ST-10XME camera for regular operations partly due to the better sensitivity of the camera in comparison to the SXVR-H36 camera, and due to the availability of a filter wheel that can house ten filters.
Figure 5 summarizes the seeing values for the R -band images taken during 2014 November 26 through 2015 April 17. The optical alignment has been improved during this period of operation, and we sometimes achieved seeing conditions of
PPT Slide
Lager Image
. With the ST-10XME camera, we achieved limiting magnitudes of R = 21.5 mag for a 15 min exposure, with a clear dark night and a seeing size of 2.2 arcsec.
PPT Slide
Lager Image
The R-band seeing statistics between 2014 November 26 through 2015 April 17. The median seeing is .
- 4.3. Optical Performance and Tracking Accuracy
In Figure 6 , we show the R -band images of the point spread function (PSF) at different parts of the field of view. The PSFs are constructed using stars in each sec- tion of the image. An exposure time of 60 sec is used for this image. We find that the image quality is uniform over the field of view of ST-10XME with a PSF FWHM of
PPT Slide
Lager Image
. However, stars appear slightly elongated (an axis ratio, b / a , of ~0.95). The PSF elongation is also visible in the images taken with much shorter exposures (5 sec). Therefore, we conclude that the elongation is caused mainly by the optics of the telescope.
PPT Slide
Lager Image
The PSF image at different sections of the field of view of the ST-10XME camera. The PSF shape is uniform over the camera field of view, but is slightly elongated, which is partly due to the inaccuracy in tracking, but mostly due to the telescope optics.
Additionally, we note that the PSF can be elongated due to the inaccuracy in tracking for long exposure times. We examined the tracking accuracy using a series of images taken over a long period of time. If the tracking is perfect, we expect to find that a star will be located at the same position on the chip in successive frames. Otherwise, the star will move toward a certain direction in successive exposures. We find a drift of about
PPT Slide
Lager Image
/min along both the RA and Dec directions, with the direction of the drift changing depending on the location on the sky. This test indicates a total drift of ~
PPT Slide
Lager Image
/min.
We calculate how this kind of tracking error elongates the PSF. Let us assume that the telescope point ing drifts toward a single direction at a rate of k in units of arcsec/min. For a given exposure time texp , this translates into a movement of a star position by an amount of ktexp arcmin, which causes an elongation of the stellar image in that direction. Assuming that the PSF profile, PSF( x ), can be approximated with a Gaussian function, the elongated PSF profile can be described as,
PPT Slide
Lager Image
where σ = FWHM/2.35, and x -direction is taken as the direction of the elongation. The resulting function resembles the Gaussian form closely, and the FWHM and b / a values of the elongated PSF can be derived numerically using Equation (1).
In Figure 7 , we show how the axis ratio changes a function of texp according to Eq. (1). The current system hardly achieves a PSF FWHM better than
PPT Slide
Lager Image
. Under such conditions, a 180 sec exposure can create an elongated PSF with b / a ≃ 0.95. For seeing values of FWHM ~
PPT Slide
Lager Image
, the PSF elongation is not noticeable even with an exposure of around 5 min. We conclude that the current system can be used to take images with 180 sec exposure, without distorting the PSF shape worse than b / a = 0.95.
PPT Slide
Lager Image
The PSF elongation (axis ratio) due to a drift in the telescope pointing as a function of the exposure time (texp). The numbers next to each line indicate the FWHM (arcsec) of a round PSF without the pointing drift. The drift rate is assumed to be /min.
Current LSGT Performance
PPT Slide
Lager Image
a 5-σ detection of point source with 15 min exposure, seeing, and full moon.b Same as above, but with new moon.c The limiting magnitudes in B and V (under new moon) are about the same as the R-band value.
5. SCIENCE PROGRAMS AND CURRENT USAGE
Currently, there is one regular science program running on the telescope. It is the Intensive Monitoring Survey of Nearby Galaxies (IMSNG). IMSNG performs high cadence imaging observations of nearby galaxies using facilities at several different observatories. By using telescopes at multiple time zones, it is possible to achieve very high cadence monitoring of nearby galaxies with time intervals as short as 2-3 hours. Since 2014 December, we have been using LSGT to monitor nearby galaxies at distances less than 50 Mpc. These galaxies are chosen to have high near-ultraviolet (NUV) fluxes, implying high star formation rates. The scientific aim of the project is to detect transients, such as supernovae, in a very early phase to gain insights about their energetics. Through this program, we succeeded in detecting SN 2015F in a very early phase at a daily cadence ( Im et al. 2015 ). Figure 8 shows NGC 2442 before and after the appearance of SN 2015F.
PPT Slide
Lager Image
BVR composite image of NGC 2442 and the location of SN 2015F before and after its emergence (R-band).
We have also taken other verification images to evaluate the performance of LSGT. In Figure 9 , we show single frame images of NGC 2467 (a star forming region), NGC 2207 (an interacting galaxy pair), and a mosaic image of Omega Centauri (NGC 5139). During SNU observational classes for astronomy majors, LSGT has been used to study brightness variations of asteroids, color-magnitude diagrams of stellar clusters, surface brightness profiles of nearby galaxies, and light curves of variable stars and exoplanet transit events.
PPT Slide
Lager Image
Example LSGT images (BV R composite). From top to bottom, NGC 2467 (”Skull and Crossbones nebula), NGC 2207 (an interacting galaxy pair), and NGC 5139 (Omega Centauri, a galactic globular cluster). Note that the top two images show a single frame field of view, but the bottom panel is a mosaic of 9 LSGT frames, covering a 30′ by 40′ field. These images were taken with one to three minute exposures.
6. FUTURE UPGRADES
We hope to upgrade the LSGT system in the near future in two areas.
First, we will work on the telescope optics to improve the image quality. Currently, we mostly achieve image PSF FWHM above
PPT Slide
Lager Image
, as shown in Figure 6 . Better image performance has been achieved through the use of other PlaneWave CDK telescopes at the same site. These PlaneWave systems are very similar to LSGT, so there is room for improving the image quality.
Second, we plan to install a new camera and new filters to improve the sensitivity and expand the wavelength coverage. We recently purchased a 1k x 1k CCD camera (iKon-M 934 Series) from Andor, Inc. that is equipped with a back-illuminated, deep depletion CCD (BEX2-DD) for better sensitivity at both short and long wavelengths. This camera is similar to the CQUEAN camera (Park et al. 2010), but with an improved sensitivity at short wavelengths. The new camera boasts ≳ 90% QE from 0.4 to 0.9 μ m, with QE = 30% at 1 μ m ( Figure 3 ). We will match it with an 18 slot filter wheel that will house a standard set of grizY filters and a suite of medium-band filters with wavelength widths of 50nm for detailed studies of the spectral energy distribution of objects such as quasars, GRBs, AGNs, and SNe, and photometric reverberation mapping of AGNs. The expected date of operation of the new camera is in the second half of 2015.
7. SUMMARY
In this paper, we presented the characteristics and the current performance of LSGT, and our plan for future upgrades. LSGT is a 0.43-meter telescope installed at SSO, Australia that can be operated remotely from the SNU campus in Seoul, Korea. It is currently fully operational, with LSGT activities including the use for observational classes at SNU and a long term research project of monitoring nearby galaxies for understanding the nature of transients. The telescope can reach a limiting magnitude of R ~ 21.5 mag at 5− σ with 15 min exposure under good weather (photometric condition), good seeing (FWHM~
PPT Slide
Lager Image
), and dark sky (new moon). In the near future, we plan to improve the optical performance of the telescope and also install a new camera that will be several times more sensitive than the current camera at both short and long wavelengths.
http://planewave.com
http://itelescope.net
Acknowledgements
This work was supported by the Creative Initiative program, No. 2008-0060544, of the National Research Foundation of Korea (NRFK) funded by the Korean government (MSIP). MI acknowledges the hospitality and the support of the Korea Institute for Advanced Study, where part of this work was carried out. This paper includes the data taken at the Siding Spring Observatory in Australia. We thank the staff of iTelescope.Net and SSO, especially Brad Moore, Peter Lake, and Lars Hansen for their professional assistance during the installation, the performance optimization, and the operation of the telescope. We thank Richard Hendick of PlaneWave Instruments for providing us with the telescope efficiency curve. We also thank Sang Gak Lee for her generous contribution to make the telescope possible.
References
Aceituno J. , Sanchez S. F. , Aceituno F. J. 2011 An All-Sky Transmission Monitor ASTMON, PASP 123 1076 -    DOI : 10.1086/661918
Choi C. , Im M. 2014 SNUO Observation of GRB 130427A The Tenth Pacic Rim Conference on Stellar Astrophysics, ASP Conference Series 482 203 -
Im M. , Choi C. , Yoon S.-C. 2015 The Very Early Light Curve of SN 2015F in NGC 2442: A Possible Detection of Shock-Heated Cooling Emission and Constraints on SN Ia Progenitor System ApJS submitted
Im M. , Ko J. , Cho Y. , Choi C. , Jeon Y. , Lee I. , Ibrahimov M. 2010 Seoul National University 4K×4K Camera (SNUCAM) for Maidanak Observatory JKAS 43 75 -
Kim E. , Park W.-K. , Jeong H. 2011 Auto-Guiding System for CQUEAN (Camera for QUasars in EArly uNiverse) JKAS 44 115 -
Lee J. , Choe S.-U. , Jung J.-H. , Woo H.-G. 2009 Astronomical Observation Environment Study focusing on Night Sky Brightness Variation under Light Pollution JKESS 30 344 -
Leinert C. , Mattila K. 1998 Natural Optical Sky Background, Preserving the Astronomical Windows ASP Conference Series 139 17 -
Lim J. , Chang S. , Pak S. , Kim Y. , Park W.-K. , Im M. 2013 Focal Reducer for CQUEAN (Camera for QUasars in EArly uNiverse) JKAS 46 161 -
Park W.-K. , Pak S. , Im M. 2012 Camera for Quasars in Early Universe (CQUEAN) PASP 124 839 -    DOI : 10.1086/667390
Patat F. 2003 UBVRI Night Sky Brightness During Sunspot Maximum at ESO-Paranal A&A 400 1183 -
Pedani M. 2009 Sky Surface Brightness at Mount Graham: UBVRI Science Observations with the Large Binocular Telescope PASP 121 778 -    DOI : 10.1086/603605